MIDI 200 Remote

Product Overview

Articulated Emergency LED Driver

The ELEDD MIDI 200 REMOTE range of LED emergency modules has been designed to enable conversion of general lighting for emergency operation.
Each variant has controlled current outputs, suitable for driving multiple power LEDs or multi-chip LED arrays with forward voltages (Vf) of 50V to 200V, and built-in adaptability that allows for optimum output current based on the forward voltage of the specific light engine for a more precise match to the controlled LED scheme.

Related Downloads

Download File

Related Downloads

Download File

MIDI 200 Remote Technical Specifications

Specifications

Supply voltage230 V

Supply frequency50/60 Hz

Supply current (max)25 mA

Power factor0.5 - 0.7

Output voltage55 to 200 V

Total circuit power (max)

Total circuit power (nominal)

Ambient temperature (ta)0°C to +35°C

Max case temperature (tc)+70°C

Conductor size0.2 to 1.5mm²

Battery charge current - NiMH (4Ah)200 mA

Battery charge voltage

Battery discharge current

Battery discharge voltage

Emergency duration3 hours

Recharge period24 hours

Weight of control gear437 g

Features
SmartCharge™
SmartCharge™ applies an intermittent charging duty cycle designed for use with NiMH batteries. This provides energy efficient charging maintenance, reduced operating temperatures and optimum service life of NiMH batteries.
Technology Options
Standard
For applications where self-testing is not required or suitable, the non-AutoTest® option provides the same quality and performance expected of Mackwell products, without the AutoTest® feature.

DALI AutoTest®
Provides benefits by enabling testing and monitoring of an emergency lighting system either on-site or via an internet connection. DALI AutoTest® is ideal for monitoring larger buildings and multiple sites. The product defaults to standalone AutoTest when not connected to a DALI network
Relevant Standards
  • EN 61347-2-7
  • EN 61347-2-13
  • EN 60598-2-22
  • BS 5266-1
  • EN 62034
  • EN 62386
  • EN 62384
  • ICEL 1004
Batteries
ELEDD MIDI 200 REMOTE is available with a rechargeable NiMH battery. For details on compatible batteries, see the compatibility chart on the final page of this datasheet. For
1 hour emergency operation, please contact Mackwell for further details.

Image Preview

MIDI 200 Remote Product Ranges

Standard
Order Codes Description
9005377 ELEDD MIDI REMOTE 200V 3W NiMH
9005379 ELEDD MIDI REMOTE 200V 4W NiMH
DALI
Order Codes Description
9005378 ELEDD MIDI REMOTE 200V 3W with NiMH & DALI
9005380 ELEDD MIDI REMOTE 200V 4W with NiMH & DALI
Replacement Batteries
Order Code Description
9005627 Battery Box for ELEDD 3C 4Ah NiMH
9001700 Battery Box for ELEDD 4C 4Ah NiMH
Replacement LED Indicators
Order Code Description
9001715 520mm Diffused Bi-Colour LED Complete with Bezel
9001737 520mm Diffused Green LED Complete with Bezel

* Other variants may be available on request. Contact your Mackwell sales representative for further information.

Key Features

  • High performance 3 Watt LED
  • Miniature design blends into the architectural environment
  • Integral bi-colour status indicator
  • Available in maintained or non-maintained operation
  • Various technology options to choose from including DALI and central battery
  • Articulated control gear for easy installation
  • SELV compliant
  • SmartChargeTM technology
  • 3 hours emergency duration
  • Designed and manufactured in the UK

EOF Calculator

Required Information

In order to choose the appropriate ELEDD MIDI for a conversion project, certain values will need to be determined beforehand. You can use the below EOF Calculator to help you to work out the LED Emergency Output Factor (EOF).

Approx. Emergency Power
* Required
Input Power
* Required
Want A More Accurate Calculation?

The following information is useful when choosing an emergency conversion module: 1. Luminaire Input Power, 2. Emergency Output Factor (EOF) when driving an entire LED array, 3. LED parameters of the luminaire and 4. Luminous flux (lumens) required in emergency operation. It is likely that you will not have all of this information so, this handy calculator will help you in choosing the most appropriate product for your needs, based on the information you have available. The more information you input, the more accurate your calculation will be. Simple!

Least Accurate

Look at this section to determine a more accurate emergency BLF for conversion of a partial LED array, based on calculations that determine the emergency flux from a specific set of figures including module performance, and lamphead voltage/current/flux characteristics in mains mode.

Lamphead Power
* Required
Calculate EOF
More Accurate

Look at this section to determine a more accurate emergency BLF for conversion of a partial LED array, based on calculations that determine the emergency flux from a specific set of figures including module performance, and lamphead voltage/current/flux characteristics in mains mode.

Lamphead VF - Volts (V)
* Required
Lamphead IF - Amps (A)
* Required
Calculate EOF
Most Accurate
(Entire LED Array Conversion)

Look at this section to determine a more accurate emergency BLF for conversion of a partial LED array, based on calculations that determine the emergency flux from a specific set of figures including module performance, and lamphead voltage/current/flux characteristics in mains mode .

Emergency LED Current

This figure is determined by taking data from the corresponding ELEDD MIDI product datasheet. Read from the graphs of emergency LED current based on connected emergency lamphead VF.

* Required
Lamphead VF - Volts (V)
* Required
Lamphead IF - Amps (A)
* Required
Mains Flux
* Required
Calculate EOF
Most Accurate
(Partial LED Array Conversion)

Look at this section to determine a more accurate emergency BLF for conversion of a partial LED array, based on calculations that determine the emergency flux from a specific set of figures including module performance, and lamphead voltage/current/flux characteristics in mains mode.

Emergency LED Current

This figure is determined by taking data from the corresponding ELEDD MIDI product datasheet. Read from the graphs of emergency LED current based on connected emergency lamphead VF.

* Required
Emergency Lamphead VF - Volts (V)
* Required
Lamphead VF - Volts (V)
* Required
Lamphead IF - Amps (A)
* Required
Mains Flux
* Required
Calculate EOF
Back to Start

Emergency Flux :

Emergency BLF :

Back to Start

* Note: This calculator is provided as a guide. Please consult the relevant product documentation to ensure compatibility, or contact mackwell for further information.

Enquire Today

For more information, please call us on +44 (0) 1922 458 255 or send us a message below.


First Name *
Last Name *
Telephone Number *
Email Address *
Message *
I would like to opt in to receive marketing communications via: